| M.A.P. gaskets and gasket sets are made
for M.A.P. using the finest imported Swedish "Klinger" or
American made non-asbestos material. The customer should Take NOTE:
"M.A.P. gaskets and M.A.P. gasket sets fit like no other!" This is
partly due to our own staff's time, effort and quality control
procedures, but more importantly, we have refabricated (not simply
reworked old dies) all of our dies to make sure all M.A.P. gaskets fit
perfectly the first time. We are thus able to warrant all of our gaskets
for an unusually good leak proof fit. Ask your local dealer for genuine
M.A.P. Cycle gaskets and M.A.P. Cycle seals kits.
|
| We have been able to exclusively utilize
the source and tooling of "Big-D Cycle" to vastly increase our
range of gaskets! |
| M.A.P. gasket sets not only include all
gaskets (No Head Gasket - No Seals) for the particular job but gaskets
in our kits were carefully thought out to avoid the unnecessary. Gaskets
and seals are different! |
|
M.A.P. GASKET SETS
(Order Head Gasket Separately) |
|
|
|
MAP0102*
|
TRIUMPH 500 II's - Top-End Only '63-74
|
|
|
MAP0103*
|
TRIUMPH 500 II's - Complete Engine Set '63-74
|
|
|
*NOTE: For 1959-1963
TRIUMPH 500 II's - Order Appropriate KIT Plus Two (2) of 70-3758 Special
Pushrod Gaskets |
|
|
|
MAP0104
|
TRIUMPH 650 - Top-End Only '63-72 (All)
|
|
|
MAP0104/A |
TRIUMPH 650 - Top-End Only '63-70 (All) |
|
|
MAP0104/B |
TRIUMPH 650 - Top-End Only '71-72 (All) |
|
|
MAP0105/A
|
TRIUMPH 750 II's - Top-End Only '73-79 (All) |
|
|
MAP0105/B
|
TRIUMPH 750 II's - Top-End Only '80-83 (T140 Only) |
|
|
|
|
|
|
MAP0106
|
TRIUMPH 650-750 II's Bottom-End Set Only '63-83
|
|
|
NOTE: For Complete Engine Set - Order the Correct
Top-End Gasket Set, a MAP0106 & a Head Gasket (as required) |
|
|
|
MAP0110
|
TRIUMPH T150 - T160/ROCKET III - Top End Only
(ALL)
|
|
|
MAP0111
|
TRIUMPH T150 - Complete Engine Set |
|
|
MAP0112
|
TRIUMPH T160 - Complete Engine Set |
|
|
|
|
|
|
MAP0120
|
NORTON 750-850 Commando - Top-End Only (ALL)
|
|
|
|
|
|
|
MAP0130
|
BSA A50-A65 - Top-End Only '63-70
|
|
|
MAP0131
|
BSA A50-A65 - Top-End Only '71-72 |
|
|
MAP0132
|
BSA A50-A65 - Bottom-End
Only '63-70
|
|
|
NOTE:
For Complete Engine Set - Order the Correct Top-End Gasket Set, a MAP0132
& a Head Gasket (as required)
|
|
|
Emgo Gasket Sets
Made in Taiwan |
|
|
|
EM37720 |
TRIUMPH T120 - Top-End Gasket Set 1963-1972
(includes Copper1
Headgasket) |
|
EM37730 |
TRIUMPH T140 - Top-End Gasket Set
1973-1980 (includes Fire-Ring Fiber Headgasket) |
