TRIUMPH "TR6"-"TR7" SINGLE CARB KITS*

INCLUDE: Flow Bench Derived Polished Intake Manifold, Manifold Adapter, Prejetted Carb
with Extra Jets, Chrome Back Air Filter, Gas Line, Fittings/Clamps, Special Throttle Cable
and Instructions

MAP0318

Single 30mm carb kit

MAP0319

Single 32mm carb kit

MAP0320

Single 34mm carb kit

*NOTE: MAY REQUIRE MODIFICATIONS ON AIR BOX ON TRI/BSA OF '71-ON O.I.F. MODELS

TRIUMPH "BONNEVILLE" TWIN CARB KITS

INCLUDE: Intake Manifolds, Manifold Adapters, Prejetted Carbs with Extra Jets, Chrome
Back Air Filters, Gas Line, Fittings/Clamps, Special Throttle Cable(s) and Instructions

MAP0339

’64-’68 30mm Carbs w/Fine (20TPI) Manifolds

MAP0340

’64-’68 32mm Carbs w/Fine (20TPI) Manifolds

MAP0345

’64-’68 34mm Carbs w/Fine (20TPI) Manifolds

MAP0359

’68½-’72½ 30mm Carbs w/Coarse (16TPI) Manifolds

MAP0350

’68½-’72½ 32mm Carbs w/Coarse (16TPI) Manifolds

MAP0355

’68½-’72½ 34mm Carbs w/Coarse (16TPI) Manifolds

MAP0369¹

’72½-’75 30mm w/Bolt-On Manifolds. Twin Cables.

MAP0360¹

’72½-’75 32mm w/Bolt-On Manifolds. Twin Cables.

MAP0364¹

’72½-’75 34mm w/Bolt-On Manifolds. Twin Cables.

MAP0369/1

’76-on (Splayed Head only) 30mm with Bolt-On Manifolds. 1 into 2 Cable.

MAP0360/1

’76-on (Splayed Head only) 32mm with Bolt-On Manifolds. 1 into 2 Cable.

MAP0364/1

’76-on (Splayed Head only) 34mm with Bolt-On Manifolds. 1 into 2 Cable.

¹NOTE: BOLT-ON MANIFOLD KITS MAY BE ADAPTED FOR USE ON MOST BSA A50/A65’s
(REQUIRES SEPARATE SPECIAL BOLT SET MAP0580 and the remachining of Bolt-On Manifold
(or purchase of special BSA Manifold MAP0550).

TRIDENT/ROCKET III CARB KITS

INCLUDE: 28mm Prejetted Carbs with Extra Jets, Carb Mounting Intake Rubbers, Chrome Back Air Filters, Gas Line, Fittings/clamps, 1 into 3 Throttle Cable and Instructions.

Note: Mikuni Carb Kits Do NOT use OE Carb linkage

MAP0370

T150 (Inc. MAP0596 Air Filters)

MAP0372

T160/Rocket (Inc. MAP0598 Air Filters)

NORTON TON 750-850 COMMANDO Single CARB CONVERSION KITS

INCLUDE: Flow Bench Derived Special Intake Manifold, Manifold Adapter, Prejetted Carb with Extra Jets, Air Filter, Gas Line, Fittings/clamps, Special Throttle Cable and Instructions

MAP0380³

Single 34mm Carb CONVERSION KIT

MAP0382^2,3

Single 36mm Carb CONVERSION KIT.

MAP0384^2,3

Single 38mm Carb CONVERSION KIT

²NOTE: Air filter is NOT bolt-in

³NOTE: WHEN USED ON A MKIII ALL THE ABOVE KITS REQUIRE AN EARLY OR BARNETT (B771) THROTTLE

MAP0386³
 

NORTON AMAL SINGLE CARB CONVERSION - INCLUDES 32mm AMAL MK1 CONCENTRIC BODY & SLIDE AMAL VITON FLOAT NEEDLE, GASKETS, M.A.P. SPECIAL CONVERSION MANIFOLD & CHROME BACKED AIR FILTER.

NORTON TON 750-850 COMMANDO Twin CARB KITS

INCLUDE: Intake Manifolds, Manifold Adapter, Prejetted Carb with Extra Jets, Gas Line, Fittings/clamps, Special Throttle Cable and Instructions

MAP0390⁴

COMMANDO W/TWIN 32mm CARBS SPECIAL MANIFOLDS AND ADAPTERS (CALL FOR AVAIL)

MAP0395⁴

COMMANDO W/TWIN 34mm CARBS SPECIAL MANIFOLDS AND ADAPTERS (CALL FOR AVAIL)

⁴NOTE: WHEN USED ON A MKIII ALL THE ABOVE KITS REQUIRE AN EARLY OR BARNETT (B771) THROTTLE

EXCLUSIVE M.A.P. INTAKE MANIFOLDS:

All M.A.P. Manifolds were designed & tested on a Superflow Test Bench for BEST Air Flow. Perfect fit along with ease of installation, make these M.A.P. designed and manufactured MANIFOLDS the "BEST". MADE IN THE U.S.A. (Manifolds are NOT Individually Ported.)

TRIUMPH

MAP0500
 

TR6/TR7 Manifold - Fully polished, similar to stock, used with 30-36mm Amal, MKII or Mikuni spigot type carbs. (Inc. gaskets & 5/16 adapter mounting screws - Reqs. MAP0590 Adapter)

MAP0510

T120 Screw-In MANIFOLD - Fine (20 TPI) Thread (’64 -’68½) - Reqs. MAP0570 Hose Kit)

MAP0515

T120 Screw-In MANIFOLD - Coarse (16 TPI) Thread (’68½-’71½) - Reqs. MAP0570 Hose Kit)

MAP0520

T120/T140 Bolt-On MANIFOLD (’71½-on) - Reqs. MAP0570 Hose Kit)

NORTON (COMMANDO ONLY)

MAP0530

Single Carb CONVERSION MANIFOLD for 30-34mm CARB (Reqs. MAP0560 Adapter.)

MAP0535

Single Carb CONVERSION MANIFOLD for 36-38mm CARB (Reqs. MAP0565 Adapter)

MAP0539

Single Carb CONVERSION MANIFOLD (2" Centers) For Use with AMAL MK1 Concentric Carb..

MAP0540

Twin Carb CONVERSION MANIFOLD for 30-34mm CARB (Reqs. 2 MAP0560 Adapters)

MAP0545

Twin Carb CONVERSION MANIFOLD for 36-38mm CARB (Reqs. 2 MAP0565 Adapters)

BSA

MAP0550

A50/A65 - A MUST for ALL 30-34mm Spigot Carbs (Reqs. Hose Kit MAP0570 & MAP0580 Screws)

ADAPTERS AND ACCESSORIES

Flange to Spigot Adapters made by Mikuni for Mounting Spigot Carbs to Flange Type Manifolds. A must for Spigot Carbs using our Flange Manifolds.

MAP0560*

30-34mm ADAPTER (Mounting Hole Spacing 2.36" (60mm) C.C.)

MAP0565*

36-38mm ADAPTER (Mounting Hole Spacing 2.76" (70mm) C.C.)

*These Adapters will NOT fit stock (O.E.) manifolds.

MAP0570

Intake HOSE Kit (Includes 2 Hoses & 4 Hose Clamps) Gates Type reinforced Hose 30-34mm

MAP0572

Intake HOSE - Spigot to Spigot Gates Type reinforced Hose 30-34mm (ea.)

2928/123

Intake HOSE - Original AMAL Brand 30-34mm (ea.)

MAP0577

CLAMP - Intake Hose (Stainless) - 2" (ea.)

2928/146

CLAMP - Original Amal Brand - 2" (Narrow) (ea.)

MAP0580

Allen SCREW KIT A50/A65 (4 Special "Short Head" Plated Screws with BSA 22TPI Thread) All

MAP0582

Allen SCREW (Stainless) for Mounting Rubber ADAPTER (MAP0560/MAP0565) to M.A.P.  Manifolds (ea)

MAP0584

Allen SCREW (Stainless) for Mounting MANIFOLDS MAP0520,.MAP0530 to MAP0539 to Head (ea)

MAP0588

"T" FITTING for 5/16" FUEL LINE - NYLON (ea.)

MAP0588/B

"T" FITTING for CARB KIT 5/16" FUEL LINE - BRASS (ea.)

MAP0670

REDUCER (Adapts Triumph Petcocks to BSA Tank)

MAP0646

STOCK TYPE METAL - WON'T LEAK (RESERVE)

MAP0645

STOCK TYPE METAL - WON'T LEAK (STD)

S7550

HD Style Petcock (MALE TYPE THREADS)

S7550/F

HD Style Petcock (FEMALE TYPE THREADS)

82-3335

90 DEGREE SPIGOT

82-3353

120 DEGREE SPIGOT

82-3334

180 DEGREE (Straight) SPIGOT

82-3337

NUT (Holds Spigot to OE Petcock for 5/16" Gas Line)

MAP6582/2

FUEL LINE - 2' X 5/16" CLEAR VINYL HOSE

MAP6582/25

FUEL LINE - 25' X 5/16" CLEAR VINYL HOSE (BEST PRICE)

MAP6576/2

FUEL LINE - 2' X 5/16" NYLON BRAIDED CLEAR HOSE

MAP6576/25

FUEL LINE - 25' X 5/16" NYLON BRAIDED (BEST PRICE)

MAP0668

FERRULE - Crimp Type (AS OE) for 5/16 Gas Line

MAP0587

Hose CLAMP - Fuel Line - 5/16" (ea.)

Heavy Duty Marine rated PETCOCKS are reasonably priced. Compact Leakproof Design. GREAT for Custom and Stock Gas Tanks. 1/4" pipe thread with 5/16" Hose Barb. (Stock tanks may require pipe tape)

MAP0650

90º PETCOCK with BARB END

MAP0652

180º PETCOCK with BARB END

MAP0654

180º PETCOCK 2 POSITION (STD & RES) with BARB END